Double Glazed Window Repair

Double glazing is an energy efficient investment that stops loss of heat in winter months and helps keep your home cooler during the summer. Repairing your double-glazed windows whenever required is a great method to keep them in good working order.

Over time condensation and misting may affect your double-glazed windows. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A unruly ball or a stone flying from your lawnmowers, or a strong storm can shatter your double pane windows and leave your home vulnerable to the elements. Although a cracked glass window isn't easy to fix but it doesn't have to be replaced. In fact, the insulated glass between the two panes is still in good shape, and you can fix your double-pane windows with a little DIY effort.

First, you'll need to take any broken glass from the frame. This will be a messy job, and you'll want to take care to prevent glass shards from falling onto the floor or slipping out of the frame. Wear gloves for you hands, and an abrasive cloth around the damaged glass area to prevent further cuts or damage. After removing the broken glass, clean the frame of the window thoroughly to remove any sealant or other debris. It is important to sand rough areas of your frame to ensure an even surface for the new glazing.

After the frame has been cleaned then you can apply a fresh layer of glazing to the area in which the broken pane was removed. This is the best way to protect and seal your window. It can also reduce your energy bills by preventing water and drafts from entering the home. The next step is to choose your glazing material. There are many options available including clear tape which is more durable than regular tape, and can prevent further cracking of your window, or glazing film, which is similar to clear plastic wrapping. The advantage of this choice is that it can be painted to match the frame you have, and it will keep out rain and snow as well.

No matter what material you choose, it's important to press the glazier's points into that gap where the putty meets your frame. They will help hold the new glass in place and assist it to adhere to the frame. Glazier's points can be found in hardware stores, and they come in pre-made ropes which you roll onto the frame rabbets.

Condensation

Double glazing can be prone to condensation issues. If you encounter this issue, it is best to contact the company that installed the window. Many companies offer warranties and guarantees to provide coverage for the issues. Fogging or condensation between the windows' panes is a sign that your seals aren't working properly. Only a professional can resolve this problem by replacing both panes.

This process is a little tricky and requires special tools to take off the old one and replace the new one, however it is possible to do this by an expert who will supply the required equipment. It is recommended to leave the job to an expert. These tools could be hazardous.

Wear safety glasses and gloves if you opt to do it yourself. You may be exposed to flying glass fragments. It is important to remove any putty or metal glazing points from the grooves that will hold the new window. It is also recommended to brush the frame with wire and vacuum or wipe it with a damp cloth. After the frame is dry and clean, you will need to get a replacement glass which is 1/8 inch less in each direction than your window, and then test it in the grooves.

Depending on your frames, you will then need to apply the caulk to the grooves to ensure that the new pane is secured in the upvc window repairs near me right place. After the caulk is dry it is time to smooth it out and make any adjustments needed. The wood molding can be reinstalled.

Double glazed windows can be difficult to open or close when the weather is extremely changing. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, which causes them to slide and become stuck. If this is the issue, you can try wiping the frames down with water and lubricating the joints. However, it may be best to contact the company who installed your windows to help.

Misunderstood

Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing is made up of two panes which are separated by a space filled with argon for greater thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside which allows you to keep your temperature at a comfortable level in your home.

As time passes, the seal will begin to break down and moisture will start to build up between the window panes, which causes them to become cloudy. This occurs because the sun's rays heat the gap between window panes, which causes the water to evaporate.

This is a normal occurrence but if it happens between the window panes, it can be a problem since it will no longer be able to regulate the temperature of the room, and allows the outside temperature to influence the indoor temperature. If you notice that your double-glazed windows have become misty, call in the experts at Northfield Glass to investigate.

We can replace a single blow sealed unit without having to replace the entire window. This is much less disruptive than a complete replacement. Our misty window repair involves removing the glass, cleaning it, then replacing it with a fresh one to make an watertight seal.

There are companies within the field which claim to cut holes into your windows that are misting and inject chemicals into them, which they claim will eliminate the condensation and fog but we don't recommend this method. This is not only unsightly, but it could also damage the toughened glass and can leave you with windows that don't completely perform the function it was intended to.

It is important to fix the issue as quickly as you can, because if left untreated, it can cause mould growth which can not only damage the window, but also poses health risks to your family members. Moisture can cause other issues in your home, such as dampness or rot. In certain cases the window might need to be replaced completely.

Blown or Failed

Modern double-glazed windows come with two glass panes that have an inert gas or air in between them. This improves their thermal efficiency by keeping heat in and the cold out. As time passes, the gas may depressurize which can lead to a range of issues.

One of the most frequent is condensation that forms between the panes. Although it's a normal occurrence and doesn't mean that your window has failed however it could be an indication that you have to re-seal your windows. Condensation can be an indication that your double glazing has failed in which case it's time to get it replaced completely.

Also, look out for drafts coming through the double-glazed windows. This could be due to a failed seal or a damaged handle or a broken lock. A draught can be quite evident and can result in higher heating costs, so it is important to fix it sooner rather than later. Test the seals on the window frame by feeling the cold air.

Another sign that your window seals have failed is when you begin to notice water beads on the inside of your windows. This is a clear indication that you need to replace the seals on your double-glazed windows.

The frames of your windows are designed to move a little bit, as they need to do in order to keep the glass sheets in place. However, over time, this special packaging material may become compacted and this will crack the crucial seal. This will allow air to circulate between the panes, and decrease the efficiency of your window.

Double glazing that has ruptured a seal is an indication of failure and should be fixed immediately. A blown seal will prevent your double glazing from fulfilling its primary job of keeping cold out and warm in. A blown seal could let moisture into your home, which can result in mold and other unpleasant conditions. Contact a double glazing expert as soon you notice a blown window seal. They can fix the entire unit.